Episodes

  • The D-Code Podcast Rev 1.14 (SMTAI Series)
    Nov 12 2024

    Last of the current run of in-person episodes, The D-Code hosts wrap up a few more experiences in the Chicago area during #smtai. Daniel shares his experience in the #omronindustrialautomation Demo Lab - check out a virtual tour halfway down this page: automation.omron.com/en/us/support/automation-centers Sean describes some of what his #spi and #aoi machines are capable of doing, whether he is currently implementing each feature or not. Elias is also present.

    Show more Show less
    20 mins
  • The D-Code Podcast Rev 1.13 (SMTAI Series)
    Nov 5 2024

    The cast is back again in its second episode of a three part SMTAI special series!

    In this episode we drill down on PCBs as Sean shares his PCB fab factory tour.

    Enjoy the banter and stay tuned for part three!

    Show more Show less
    27 mins
  • The D-Code Podcast Rev 1.12 (SMTAI Series)
    Oct 30 2024

    The D-Code cast's first in person recording, coming at you from SMTAI in Rosemont, Il.

    Listen as the conversation weaves between process talk and plans for "The Show"

    Stay tuned for more episodes in this special series!

    Show more Show less
    23 mins
  • The D-Code Podcast Rev 1.11 (Featuring Jordan Danko)
    Oct 22 2024

    Note: This podcast is not about fish. Don't worry though, much of the first 10 minutes is! Turns out, the D-Code cast also has experience with caring for tropical fish. Or in Daniel's case, you show off how close you live to a truly amazing place, the Omaha Zoo.

    We promise, there is EMS-related discussion as well. From how to recognize 30 year old datasheets that may or may not describe modern best practices to the value of creating your own product for additional revenue streams, Jordan shares his excitement for this industry and the many ways he keeps planning ahead.

    #stencildesign #discusfish #pcbmanufacturing #electricalengineering

    Show more Show less
    1 hr and 14 mins
  • The D-Code Podcast Rev 1.10 (Looking ahead to SMTAI)
    Oct 15 2024

    Even keeping things brief, The D-Code can't resist ribbing each other and waxing sarcastic. In this short but sweet episode, join Daniel Stanphill, Elias Malfavon, and Sean Kincaid for a quick announcement regarding SMTAI attendance.

    Show more Show less
    15 mins
  • The D-Code Podcast Rev 1.9 (Featuring Caleb Chenoweth)
    Oct 8 2024

    The D-Code Podcast welcomes Caleb Chenoweth for what proved to be a bit of an "Operator's Special"

    Don't get us wrong - there are a lot of topics up for discussion in Rev 1.9. But if you are an operator or heavily process oriented, this episode is especially for you. Starting off with a conversation about Caleb's education and avenue he has taken to get to his current vocation, he also shares insight on continuous improvement, management, taking ownership of errors or problems, and the importance of finding process improvements out of potentially negative situations.

    What a discussion! Take a look at the tags to see what comes up and know that there is plenty more covered this week.

    #selectivesolder #robotics #electronics #engineering #collaboration #northamerica #pcbdesign #rework #pcbmanufacturing #sixsigmatraining #kaizen #continuousimprovement #supplychain #prototyping #pcb #leadership #efficiency #american

    Show more Show less
    1 hr and 36 mins
  • The D-Code Podcast Rev 1.8 (Featuring Petr Dvořák)
    Oct 1 2024

    The D-Code is thrilled to be joined by Petr Dvorak, most known on LinkedIn for his famous Red Headphones. (Sean regularly says Orange. Debate in the comments!) Petr firmly denies any sort of "celebrity status", but he'll admit the headphones are good for branding. ;)

    Discussions range from why it is important to share mistakes publicly, what it means to be "Extremely Polish", a bit of education on European history, creating a working hardware prototype from first concept through each design phase, and of course, KiCAD. If you don't understand why someone professional would choose to use a free open-source product for a knowledge deep dive, listen to this one. Petr lays it out clearly, and we can confirm he is a consummate professional!

    Don't miss Petr's content: www.linkedin.com/in/petr-dvorak-hw/

    #podcast #internationalpodcastday #pcb #hardwaredesign #brno #shenzen #prototyping #emslife #kicad #pcbfabrication

    Show more Show less
    1 hr and 26 mins
  • The D-Code Rev 1.7
    Sep 24 2024

    The D-Code returns with a cast-only recording to regale you with tales of recent collaborations between Daniel and Elias on a unique component requiring a custom solution that looks B-E-A-UTIFUL on x-ray. Linked-In was consulted and involved in planning stages, but in the end... well, take a listen!

    Other topics and features include: Aperture issues - why is a single "chad" left in otherwise functional stencil? Recurring bit returns! Viewer Questions (x2) Recurring bit returns! Best of Linked-In (1 from each host)

    Don't leave early or you'll miss yet another discussion about women and how they are skilled and stuff... just ask Elias.

    Show more Show less
    58 mins